Home-> DRAM -> EM47EM3288SBA  
 

 

DRAM products

EOREX™ DRAM products includes

Mobile SDRAM

MOBILE DDR SDRAM

SDRAM

DDR SDRAM

DDR-II SDRAM

EOL

PCN

 

 

 

 



 

Click to download datasheet regarding. Please note that the content of datasheet is subject to change without notice.


 
 

The EM47EM3288SBA is a high speed stack multi-chip package integrated 4Gbits x2 DDR3 SDRAM and fabricated with ultra high performance CMOS process containing 8G bits which organized as 32Mbits x 8 banks by 32 bits. This synchronous device achieves high speed double-data-rate transfer rates of up to 1600 Mb/sec/pin (DDR3-1600) for general applications. The chip is designed to comply with the following key DDR3 SDRAM features: (1) posted CAS with additive latency, (2) write latency = read latency -1, (3) On Die Termination (4) programmable driver strength data,(5) seamless BL4 access. All of the control and address inputs are synchronized with a pair of externally supplied differential clocks. Inputs are latched at the cross point of differential clocks (CK rising and /CK falling). All I/Os are synchronized with a pair of bidirectional differential data strobes (DQS and /DQS) in a source synchronous fashion. The address bus is used to convey row, column and bank address information in a /RAS and /CAS multiplexing style. The 8Gb DDR3 devices operates with a single power supply: 1.5V 0.075V VDD and VDDQ. Available package with RoHS compliance: FBGA-136Ball (14 x 12 x 1.4 mm)

 

 
Feature

JEDEC Standard VDD/VDDQ = 1.5V 0.075V.

All inputs and outputs are compatible with SSTL_15 interface.
Fully differential clock inputs (CK,/CK) operation.
8 banks

Posted CAS by programmable additive latency

Bust length: 4 with Burst Chop (BC) and 8.

CAS Write Latency (CWL): 5, 6, 7, 8

CAS Latency (CL): 6, 7, 8, 9, 10, 11

Write Latency (WL) =Read Latency (RL) -1.

Bi-directional Differential Data Strobe (DQS)
Data inputs on DQS centers when write.
Data outputs on DQS, /DQS edges when read.
On chip DLL align DQ, DQS and /DQS transition with CK transition.
DM mask write data-in at the both rising and falling edges of the data strobe.

Sequential & Interleaved Burst type available both for 8 & 4 with BC.

Multi Purpose Register (MPR) for pre-defined pattern read out

On Die Termination (ODT) options: Synchronous ODT, Dynamic ODT, and Asynchronous ODT

  Auto refresh and self refresh.
 

8,192 Refresh Cycles / 64ms.

 

Refresh Interval: 7.8us Tcase between 0C ~ 85C

 

Refresh Interval: 3.9us Tcase between 85C ~ 95C

  RoHS Compliance
 

Driver Strength: RZQ/7, RZQ/6,RZQ/5(RZQ=240Ω)

 

High Temperature Self-Refresh rate enable

 

Multi Purpose Register for pre-defined pattern read out

 

ZQ calibration for DQ drive and ODT

 

RESET pin for initialization and reset function

DataSheet
Timing
 
 
Copyright 2008 Eorex Corporation. Terms and conditions